In switches, like Cisco Catalyst 2960X-24TS-L, datasheet mention input power: 100 to 240 VAC, 1A to 0.5A. So, I assume input current = 1A@100VAC and 0.5A@240VAC
or Cisco Catalyst 3850 + Power Supply PWR-C1-350WAC: 100-240VAC, 4-2A. So, I assume input current = 4A@100VAC and 2A@240VAC
But in Cisco ASA 5525-X datasheet: AC range line voltage : 100 to 240 VAC, AC current : 4.85A
I am expecting that datasheet current (4.85A) is at 100 VAC and because we use 220 VAC, it should be 2 or 2.5A.
I am calculating input current to size the UPS requirement and considering 4.85A is too high.
is my expectation, for 2A, correct ? do you know a reference from manual or datasheet ?
