cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
785
Views
0
Helpful
0
Replies

Cisco ASA 5525-X QoS problems

NikTNV
Level 1
Level 1

I have a problem with QoS which appears with all images later than 9.5.2, I don't have this problem with 9.5.2. I have two interfaces which look into the Internet and one interface which looks into a local network: Outside_1 and Outside_2 interfaces, both have almost identical QoS rules with output policing and Inside interface which has a QoS rule with input policing. In case when traffic goes in Inside-Outside_1(output) or Outside_1-Inside(input) directions, Outside_1 QoS rules only works, this rule polices input and output traffic, Inside QoS Rule doesn't do anything. In case when traffic goes in Inside-Outside_2(output) or Outside_2-Inside(input) directions, all works right, output traffic is policed by Outside_2 QoS rules, input traffic is policed by Inside QoS rules.

0 Replies 0
Review Cisco Networking products for a $25 gift card