cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
904
Views
0
Helpful
0
Replies

Cisco ASA priority/QoS

Hello,

 

I have a server in a remote site connected via S2S-VPN to the main office. Sometimes when a User is transfering a large file the bandwidth usage is up to 100%. This causes that the communication to the server is slow.  I'm new to configuring things like QoS and priority in ASA. So I'm searching for a solution that priorizes the communication to the server. I'v read an article about QoS and priority. But I'm not 100% sure if my thoughts are right.

 

One way would be to restrict web traffic to some kbits, which is not my intention. So I think priority is the right way to go. When I create a new service policy rule in ASDM like this, will this work?

 

Interface: Inside: Traffic matches -> Source - Destination -> Client-LAN to Server -> Any protocoll -> Action -> QoS -> Enable Priority for this flow

 

My understanding is that with this rule the traffic to the server has a higher priority in the queue and will be processed faster than web traffic or any other traffic. Am I right or will my thoughts not work?

 

Thanks for your help.

 

Greetings

Christian

 

 

 

0 Replies 0
Review Cisco Networking for a $25 gift card