03-23-2017 02:00 AM - edited 03-12-2019 02:06 AM
Hello
i wanted to buy this ASA
Cisco ASA5506-SEC-BUN-K9
ASA5506-X with FirePOWER Services
ASA 9.6(1), ASDM 7.6(1)
Is this model support for Netflow ?
Can anyone confirm that for me before i buy that ?
Kind Regards
Usman
Solved! Go to Solution.
03-23-2017 02:57 AM
Yes the ASA 5506 supports Netflow monitoring and exporting.
Its output format is NSEL which most Netflow collectors can parse. (Ironically, Cisco Prime Infrastructure cannot.) I have used ASAs to eport Netflow to both SolarWinds NPM and Paessler PRTG without any problems.
03-23-2017 02:57 AM
Yes the ASA 5506 supports Netflow monitoring and exporting.
Its output format is NSEL which most Netflow collectors can parse. (Ironically, Cisco Prime Infrastructure cannot.) I have used ASAs to eport Netflow to both SolarWinds NPM and Paessler PRTG without any problems.
03-23-2017 03:06 AM
Thank you Sir that i just wanted to confirm as i use to have 5505 and Netflow was available there.
:)
03-23-2017 03:08 AM
You're welcome.
Note that if you intend to use the FirePOWER services module it requires separate licensing. You choose IPS, URL Filtering and/or Malware protection in 1-, 3- or 5-year term.
03-23-2017 03:16 AM
This is what i have
Licensed features for this platform:
Maximum Physical Interfaces : Unlimited perpetual
Maximum VLANs : 30 perpetual
Inside Hosts : Unlimited perpetual
Failover : Active/Standby perpetual
Encryption-DES : Enabled perpetual
Encryption-3DES-AES : Enabled perpetual
Carrier : Disabled perpetual
AnyConnect Premium Peers : 50 perpetual
AnyConnect Essentials : 50 perpetual
Other VPN Peers : 50 perpetual
Total VPN Peers : 50 perpetual
AnyConnect for Mobile : Enabled perpetual
AnyConnect for Cisco VPN Phone : Enabled perpetual
Advanced Endpoint Assessment : Enabled perpetual
Shared License : Enabled perpetual
Total UC Proxy Sessions : 160 perpetual
Botnet Traffic Filter : Enabled perpetual
Cluster : Disabled perpetual
This platform has an ASA 5506 Security Plus license.
03-23-2017 03:22 AM
That's all good but FirePOWER licenses won't show up there.
They are applied to the FirePOWER service module from ASDM (or FirePOWER Management Center when they are part of an enterprise deployment) after you have done the initial setup.
See the Quick Start Guide for details on that:
http://www.cisco.com/c/en/us/td/docs/security/asa/quick_start/sfr/firepower-qsg.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide