Cisco ASA5510 - Connect 2 Internal Networks

[rezenearaia]

Hi,We recently got a Cisco ASA 5510 Security Appliance and I have some general question that I hope someone out there has the answer to, but first let me explain: We have 1 T1 internet connection, and we have 2 internal networks.  These 2 internal networks currently hav access to the internet.  I am having issues with the 2 internal networks being able to communicate with each other. Can anyone offer some guidance?

[sean_evershed]

Hi,

Do you mean that they can't communicate with each other?

Do they both have the same security level configured? If so you will need to use the command same-security-traffic permit inter-interface.

This will permit communication between interfaces that have the same security level.

See below a reference:

http://www.cisco.com/en/US/docs/security/asa/asa82/command/reference/s1.html#wp1421315

[rezenearaia]

Hi Sean,

At the moment they can't communicate with each other.

Both have the same security levels configured, and I have enabled the same-security-traffic permit inter-interface command.  But I am unable to ping the other network.  I can post the config  if you would like.