Cisco ASA5510 - VPN Problem

[dtsteinb]

I have a Cisco ASA 5510 and when someone VPN's in they can't reach one of my subnets (10.0.10.X).  This subnet is tied to my AZURE servers and when a user tries to do anything that will require ADFS it fails because it can't connect.  If  they disconnect from VPN they are fine.  I am not sure what I need to do to be able to connect to this.  When I ping 10.0.10.X it times out.   VPN is setup as Split tunnel.

[mvsheik123]

Hi,

Please post sanitized configs of ASA (related to VPN) or Make sure 10.0.10.x is advertised to VPN user and included in nonat /access-list rules.

hth

MS

[Dennis Mink]

if you use a split tunnel it might be that you have no route to the azure servers from the VPN. do a print route on a VPN connected machine and see if 10.0.10.x is routable from that machine. and also if the azure servers have a route back to the IP address of the vpn client

[dtsteinb]

This is been resolved. . Had to add subnet to Azure.