10-11-2021 05:31 AM
Think ASA and ASDM are compatible. Have setup capture and can see the traffic on https but asdm not working.
show capture
capture capin type raw-data interface Outside interface management [Capturing - 738 bytes]
match tcp host 10.10.205.183 host 10.40.254.251 eq https
show ip
System IP Addresses:
Interface Name IP address Subnet mask Method
GigabitEthernet0/0 Outside 10.40.254.251 255.255.255.0 CONFIG
GigabitEthernet0/1 Inside 10.40.253.254 255.255.255.0 CONFIG
GigabitEthernet0/5 failover 169.254.0.1 255.255.255.0 unset
Management0/0 management 192.168.1.1 255.255.255.0 CONFIG
show run | i http
service-object tcp destination eq https
failover replication http
http server enable
http 192.168.1.0 255.255.255.0 management
http 10.10.200.0 255.255.255.0 Inside
http 10.10.200.0 255.255.255.0 Outside
http 10.40.205.0 255.255.255.0 Inside
http 10.40.253.0 255.255.255.0 Inside
http 10.20.200.0 255.255.255.0 Outside
http 10.40.0.0 255.255.0.0 Inside
Solved! Go to Solution.
10-11-2021 06:10 AM
Your source host address 10.10.205.18 is not allowed in the networks declared in the http statements.
10-11-2021 06:10 AM
Your source host address 10.10.205.18 is not allowed in the networks declared in the http statements.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide