05-26-2019 07:21 PM - edited 02-21-2020 09:10 AM
Hi Guys,
I have a FMC running on VM and an ORION network monitoring or ticketing system. Is it possible to integrate the FMC to ORION once there's an alert?.
Appreciate your response.
Thanks.
Regards,
Michelle
Solved! Go to Solution.
05-27-2019 07:18 AM
Configure your Solarwinds Orion NPM server as the syslog destination for FMC Alerts.
If you're also using Solarwinds Web Helpdesk, then in Solarwinds Alert Manager create a rule flow to open a Web Helpdesk ticket as the result of a Firepower alert.
I used a similar rule setup for our NOC and it works fine. FMC (or a managed device) creates an alert, it fires off a syslog message and a helpdesk ticket is generated - all automatically.
05-26-2019 11:27 PM
Hi,
Yes you can monitor via SNMP if Orion supports cisco FMC & FTD. Please go through the below links it may be helpful to you
Hope This Helps
Abheesh
05-27-2019 07:18 AM
Configure your Solarwinds Orion NPM server as the syslog destination for FMC Alerts.
If you're also using Solarwinds Web Helpdesk, then in Solarwinds Alert Manager create a rule flow to open a Web Helpdesk ticket as the result of a Firepower alert.
I used a similar rule setup for our NOC and it works fine. FMC (or a managed device) creates an alert, it fires off a syslog message and a helpdesk ticket is generated - all automatically.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide