03-24-2021 08:28 AM
Good day,
Is is possible to configure the FTD 1120 version 6.7 with dual ISP links for users with the anyconnect client to connect to the FTD using either ISP.
Looking at the configurations, you can only configure one outside interface for the global settings.
Is it that flex configs or the API explorer is required to have this done?
Solved! Go to Solution.
03-24-2021 08:38 AM
You are correct, in FDM you can only enable VPN on one interface. The command is blacklisted via flexconfig also.
So unfortunately it appears not to be possible to setup using redundant interfaces in the current versions.
HTH
03-24-2021 08:38 AM
You are correct, in FDM you can only enable VPN on one interface. The command is blacklisted via flexconfig also.
So unfortunately it appears not to be possible to setup using redundant interfaces in the current versions.
HTH
03-24-2021 08:59 AM
Thanks alot for the reply Rob.
Hmm, i suppose i will have to find out if this is in the pipeline.
03-02-2023 10:42 AM
What about using two connection profiles? And using two fqdn for vpn. vpn1.company.com and vpn2.company.com? And bind one to each ISP
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide