Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I've got 2 C9115AXI-E each connected with air-pwrinj6 to a Cisco SG200-26 Switch. The APs are running in ewc-mode and I receive the "PoE/Medium Power" power status in the GUI. Which does only make it 2x2 rather than 4x4 performance wise.
The switch i...
I do have the same issue. Light does not go from amber to green. Tried multiple SFP. I does get identified correctly and we've checked the incoming fiber with a light-meter. But there's no output from the Cisco. Any special configuration?
Interesting. I've not rebooted the firewall in my case. It usually heals itself quickly with just a couple of pings lost. But sometimes someone has to physically reseat the cable. I've replaced the cable without luck. And now I've put a Cisco switch ...
I don't know if I have the same issue. I've deployed two FPR 1010 in the last couple of weeks. On the first location which is a sub-office only have a site 2 site vpn to the main office. And on the main office there's the second unit. Which also run ...
