06-13-2007 07:37 AM - edited 03-10-2019 03:39 AM
Has anybody know of someone who has implemented the Cisco IPS in a Healthcare network with PACS traffic. When we put the IPS unit inline with a WAN site that has PACS traffic we are seeing a significant slowdown of the transfer speeds from the remote site to the PACS server
06-14-2007 07:09 AM
anyone???
06-14-2007 08:29 AM
I'm not familiar with PACS, but have a look at this post by marcabal.
Also, have you gotten a trace on both sides of the sensor? Do they look normal?
06-14-2007 08:35 AM
How do I get a trace on both sides of the sensor ?
06-14-2007 08:47 AM
You could do it right on the client and server. You can also do it on the sensor from the cli using the "packet capture" command. You'll be limited to so many MB though (15MB I think?).
06-18-2007 07:22 AM
When you say you put an "IPS unit" in line, are you using an IPS 4200 appliance, an IPS module in an ASA (if so, what model?), or an IOS IPS implementation (if so, what IOS and router?)?
What are you seeing as far as CPU and memory utilization?
What ports are your modalities\PACS sending on? How large are your studies?
Is your slowdown during peak times of transmission, or with every transfer?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide