01-22-2014 02:53 AM - edited 02-21-2020 05:05 AM
Hi dears,
I want to use Cisco ISE Guest portal. I configurate Cisco ISE and Cisco Wireless Controller as this guide:
Central WEb Authentication on the WLC and ISE Configuartion Example.
i configurate ISE and WLC. Not do any authentication configuration( for example redirect ACL) in switch.
The wireless user can connect to Guest SSID and i see the authenticarion success in ISE but the redirection is not working. user can redirect guest portal page.
Must i need do any configuration in switch? if yes which configuration??
Thanks.
I use evaluation soft for ISE. Is this a cause a problem?
01-22-2014 08:16 PM
If this is a wireless configuration you don't need to do anything on a switch. I'm not sure I fully understand what you are doing, but it sounds like you are having an issue with the Authorization Policy. When you look at the ISE Operations>Authentications what Authentication Policy is the successful Authenticaiton matching? It sounds like your not landing on the right authorization policy.
Regards,
Brandon
01-23-2014 05:34 AM
Thank you very much to help me.
i attach the result file.
Thank you very much to help me.
I did not configurate DNS ip address in intial configuartion in ISE. Is this issue cause the DNS problem??
thanks.
01-23-2014 05:36 AM
I can access ISE this way:
https://172.31.3.111/admin/#pageId=com_cisco_xmp_web_page_admin_guestMgmt_settings
i do not config DNS ip in ISE server.
01-23-2014 07:21 AM
The redirect URL shows an FQDN. If your host cant resolve that you're not going to get to it. Looks like you solved your own problem.
Regards,
Brandon
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide