[Cisco Security Manager][4.6] CSM_MANAGEMENT_CRED_username ?

[stephane.walker]

Hello,

What is the meaning of the line "CSM_MANAGEMENT_CRED_username" which appears in the file generated after a deployement ? What is its utility ?

Thank you,

Stephane

[nsadhasi]

Stephane,

CSM_MANAGEMENT_CRED_username shown after due to failed deployment does not have any signifcance.You can ignore this message.It will be fixed in the subsequent CSM release.

Thanks,

Sadha

[David Levy]

Your post was two years ago, I'm on 4.11 and we're seeing this error message that is now causing the deployment queue not to empty.  I would say it has a large significance.

[Marcus Eickhoff]

Hi,

it's 2020.

We're upgraded to v4.20 and the messages appear again, in two varieties.

We're using two local usernames, "monitoring" and "administrative"

First message

"CSM_MANAGEMENT_CRED_username monitoring password ..."

and the second message

"CSM_MANAGEMENT_CRED aministrative password ..."

Here's one addtional difference can be detected:

CRED_username monitoring and CRED aministrative - look different - why ?

We're current expierencing massive problems with our CSM since the last upgrade from v4.19.

Best.

marcus

[Marcus Eickhoff]

Hi,

one addtional comment ...

Line# 2. (SUCCESS) Sent (Tue Mar 10 08:41:56 CET 2020): CSM_MANAGEMENT_CRED_username monitorin password ****** encrypted
Received (Tue Mar 10 08:42:01 CET 2020):
Line# 3. (SUCCESS) Sent (Tue Mar 10 08:41:56 CET 2020): snmp-server enable traps snmp authentication linkup linkdown coldstart
Received (Tue Mar 10 08:42:01 CET 2020): ERROR: dns server-group <DefaultDNS> is in use by tunnel-group <DefaultRAGroup>. Please remove the relevant configuration before removing the dns server-group.
Line# 4. (SUCCESS) Sent (Tue Mar 10 08:41:56 CET 2020): CSM_MANAGEMENT_CRED administrative password ****** encrypted privilege 15
Received (Tue Mar 10 08:42:01 CET 2020):

The CSM is sending this at the beginnig of most deploys.

Can anyone tell us what's exactly going on here ?

Best.

marcus