cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

557
Views
0
Helpful
4
Replies
Highlighted

[Cisco Security Manager][4.6] CSM_MANAGEMENT_CRED_username ?

Hello,

What is the meaning of the line "CSM_MANAGEMENT_CRED_username" which appears in the file generated after a deployement ? What is its utility ?

Thank you,

Stephane

4 REPLIES 4
Highlighted
Beginner

Stephane, CSM_MANAGEMENT_CRED

Stephane,

 

CSM_MANAGEMENT_CRED_username shown after due to failed deployment does not have any signifcance.You can ignore this message.It will be fixed in the subsequent CSM release.

 

Thanks,

Sadha

Highlighted
Beginner

Your post was two years ago,

Your post was two years ago, I'm on 4.11 and we're seeing this error message that is now causing the deployment queue not to empty.  I would say it has a large significance.

Highlighted

Re: Your post was four / six years ago,

Hi,

it's 2020.

We're upgraded to v4.20 and the messages appear again, in two varieties.

We're using two local usernames, "monitoring" and "administrative"

First message

"CSM_MANAGEMENT_CRED_username monitoring password ..."

and the second message

"CSM_MANAGEMENT_CRED aministrative password ..."

 

Here's one addtional difference can be detected:

 

CRED_username monitoring and CRED aministrative - look different - why ?

 

We're current expierencing massive problems with our CSM since the last upgrade from v4.19.

 

Best.

marcus

Highlighted

Re: Your post was four / six years ago,

Hi,

one addtional comment ...

Line# 2. (SUCCESS) Sent (Tue Mar 10 08:41:56 CET 2020): CSM_MANAGEMENT_CRED_username monitorin password ****** encrypted
Received (Tue Mar 10 08:42:01 CET 2020):
Line# 3. (SUCCESS) Sent (Tue Mar 10 08:41:56 CET 2020): snmp-server enable traps snmp authentication linkup linkdown coldstart
Received (Tue Mar 10 08:42:01 CET 2020): ERROR: dns server-group <DefaultDNS> is in use by tunnel-group <DefaultRAGroup>. Please remove the relevant configuration before removing the dns server-group.
Line# 4. (SUCCESS) Sent (Tue Mar 10 08:41:56 CET 2020): CSM_MANAGEMENT_CRED administrative password ****** encrypted privilege 15
Received (Tue Mar 10 08:42:01 CET 2020):

 

The CSM is sending this at the beginnig of most deploys.

 

Can anyone tell us what's exactly going on here ?

 

Best.

marcus