Cisco virtual FTD - license model and limitation

[Andrei_Hodoroaba]

Hello,

I want to migrate from physical FTD to a FTD virtual, i have just found out that the virtual FTD  has some limitation regarding the number of sub-interfaces and interfaces that can be created. 

But on a test environment i was able to create more than 50 of VLAN sub-interfaces.

Does anyone know if the limitations are based on the license that  you have? (I'm not referring at CPU, HDD,RAM).

maximum number of sub-interfaces, ACL, Other....

And what are all the limitations of a virtual FTD 

Link :https://www.cisco.com/c/en/us/td/docs/security/firepower/640/fdm/fptd-fdm-config-guide-640/fptd-fdm-interfaces.html

Thanks!

[Cristian Matei]

Hi,

    Licensing model can be found here: https://community.cisco.com/t5/security-knowledge-base/cisco-security-licensing-guide/ta-p/4445140

    Based on HW / virtual models, there are different scale numbers in terms of performance, interfaces, etc, which can be found in the Data Sheet of the respective model.

Best,

Cristian.

[nspasov]

The max number of VLAN subinterfaces for the virtual appliance is 50: https://www.cisco.com/c/en/us/td/docs/security/firepower/760/fdm/fptd-fdm-config-guide-760/fptd-fdm-interfaces.html#concept_783AD17947BF4743BCA7D6B3C47C829E