Cisco VPN client with L2TP - Is it doable?

[awaithaka]

Hello,

I'm trying to get the Cisco VPN client ver 4.6 to work with an L2TP VPN that terminates on a PIX 515.

Is this doable? At the moment, the native Msft client can connect via L2TP to the PIX, but the Cisco client would be more preferable.

thanks.

Blue.

[irisrios]

Native winodws VPN is supported for L2tP / Ipsec. For compatibilty check the URL

http://cisco.com/en/US/tech/tk583/tk372/technologies_tech_note09186a0080094e6d.shtml

[Jason Gervia]

The cisco VPN client is only for IPSEC. For l2tp support, you have to use the built in microsoft clients (or something else that supports l2tp).

--Jason