05-07-2012 11:40 PM - edited 03-11-2019 04:03 PM
hi,
from internet client usint outlook is unable to connect on 465 port . i opened port on firewall over a public ip on outside interface. does any body have idea to fix this issue.
regards
rajat
05-07-2012 11:53 PM
Wats the software version your are using on the firewall and can you share the configuration???
Thanks,
Varun
05-07-2012 11:59 PM
i am using 7.0
Cisco Adaptive Security Appliance Software Version 7.0(7)
Device Manager Version 5.0(7)
Compiled on Fri 06-Jul-07 10:37 by builders
System image file is "disk0:/asa707-k8.bin"
Config file at boot was "startup-config"
KCO-ASA-BHARTI up 83 days 16 hours
Hardware: ASA5520, 512 MB RAM, CPU Pentium 4 Celeron 2000 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash M50FW080 @ 0xffe00000, 1024KB
access-list 100 extended permit tcp any host x.x.x.x eq 465
access-list 100 extended permit tcp any host x.x.x.x eq smtp
static (DMZ,outside) x.x.x.x 192.168.100.182 netmask 255.255.255.255
regards
rajat
05-08-2012 12:27 AM
Hi Rajat,
The config look all good to me, try taking the captures, you can follow this doc for it:
https://supportforums.cisco.com/docs/DOC-17814
This would tell you which side is not responding and if the ASA is forwarding all the packets.
Thanks,
Varun
05-08-2012 01:52 AM
this is the issue with the port please check on port 465 need to enable command fixup protocol ? but i am not able to find impact of this command on firewall and other services running behind firewall
regards
rajat
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide