02-01-2014 07:37 AM - edited 03-11-2019 08:39 PM
Hi Everyone,
When i console in to ASA it shows lot of logs messages.
I do not get chance to put username and password.
Need to know which command i can use to stop logging so when i console to ASA it does not show logging there?
Regards
Mahesh
Solved! Go to Solution.
02-01-2014 07:59 AM
Hi,
Issue a 'no logging console' command.
Sent from Cisco Technical Support iPhone App
02-01-2014 07:59 AM
typically the command to stop logging to the console is:
no logging console
But if you get so many log messages that you are unable to log in to type anything, perhaps it is best to log in via the ASDM and disable logging there.
Configure > Device Management > Logging
--
Please remember to rate and select a correct answer
02-01-2014 07:59 AM
Hi,
Issue a 'no logging console' command.
Sent from Cisco Technical Support iPhone App
02-01-2014 07:59 AM
typically the command to stop logging to the console is:
no logging console
But if you get so many log messages that you are unable to log in to type anything, perhaps it is best to log in via the ASDM and disable logging there.
Configure > Device Management > Logging
--
Please remember to rate and select a correct answer
02-01-2014 08:12 AM
Many thanks it worked great
Mahesh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide