Network Security

Hi Guys we have the following scenario One of our client has a small office which has few networks (vlans) now they have sold some services to thrid party and they want to add another firewall and segregate the traffic (physically). Kindly see the at...

Hello, i have just installed the AnyConnect Mobile license over demo SecPlus license and performed the reboot(soft reboot with reload command). And now i still have 39 days for AnyConnect Mobile License... when it shoud be perpetual. That is the...

Hi. I have an ASA 5505 configured for Transparent Mode. The Outside interface connects to a router (RV042). The router manages DHCP. With the 5505 in the system, all computers can connect to the internet and to each other, except for a few. The probl...

Hey,the size of the logfile CsmReprtServer.log exceeds 12 GB. Can I manually delete this file or is this not a good idea?Thanks for your help.Sent from Cisco Technical Support iPad App

hi all, i am trying to apply some QOS to prioritise VOIP traffic over a VPN to a headend PBX i have found numerous examples of this however they utilise the "shape average" command which after some research is not available on the next gen firewall r...

We are receiving thousands of "Deny inbound UDP from x.x.x.x/53 to x.x.x.x/2713 due to DNS Response" per minute on our ASA 5510. All of the responses are destined to a signal one of our external IP's. This is overloading the our ASA and preventing tr...

IME version 7.2.6 loads and displays the IPS integrated ASA5515X software modules.All screens are accessible but selecting the "configuration" icon just hangs with spinning hour glass and "Loading Configuration" for several minutes and eventually tim...

Hi All,Have a challenge for you guys and gals.  I am trying to working out if the following is possible...In detail, the exmaple below has a pair of ASAs that are cascaded at a remote site, say ASA_LAN and ASA_WAN.  Both would be in L3 routed mode (c...

I have got two Cisco ASA 5520 running with IOS version 8.4.I am trying to get all the packet events for a given "specific source" IP address > send to a syslog server. Syslog server has been configured and working fine for other ASA events.I have cre...

Am trying the following command on ASA 8.61, however it appears the static command no longer works.  Would appreciate any insights.static (inside,outside) 10.25.0.1 10.25.0.1 netmask 255.255.240.0Thanks.

Hi All Security Experts, I upgraded a ASA firewall using the 8.6(1) version with the LOCAL_CA_SERVER, which is for the VPN clients, e.g. one time auth cert deployment, revoking. Unfortunately, I have to upgrade the version to 9.1 or above, because I ...

Hi Experts,In my topology i have pix 525e and asa 5520 in a parallel connection. I want to implement redundancy between this two firewall.My question is "is that possible to implement openBSD CARP protocol in PIX/ASA firewall?" if so please guide me ...