Configuration Changes through ASDM does not log into my Kiwi-Syslog server
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
12-08-2016 08:09 AM - edited 02-21-2020 05:58 AM
Hello,
I have configured my ASA, any configuration changes it should be logged into my Kiwi Syslog server. when I do any config-changes on my ASA through CLI then it is logging onto my syslog server, but whatever config-changes I do through ASDM that is not getting logged into my syslog server
what could be the issue?
here is the logging config:
logging enable
logging timestamp
logging list notif-cfg-changes level errors
logging list notif-cfg-changes message 111008-111010
logging console informational
logging buffered notifications
logging trap informational
logging host inside 192.168.2.16

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
02-02-2017 12:20 PM
Hi,
Ideally that should not be the case, can you try adding "logging asdm informational" and then let me know the results.
We might need to take captures on ASA to see if traffic is being sent by the ASA when any change is made from ASDM or not .
-
Pulkit
