configure communication from inside network to DMZ

[dennis.nybratt]

ASDM 6.4

Hello :-) I need help about ASA 5505 and DMZ, I have a Base License.

What do I need to do for access inside network to DMZ?

I successfully configure, internet Access for DZM and inside network, web server can be accessed from internet, but I have problem to configure communication from inside network to DMZ.

//Dennis

[dennis.nybratt]

Running config

: Saved
:
ASA Version 8.4(2) 
!
hostname qpcnet
enable password Fzc1w9KayYqp2.LH encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
!
interface Ethernet0/0
 switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
 switchport access vlan 5
!
interface Ethernet0/4
 switchport access vlan 5
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
 nameif inside
 security-level 100
 ip address 192.168.10.1 255.255.255.0 
!
interface Vlan2
 nameif outside
 security-level 0
 ip address 193.15.14.7 255.255.255.192 
!
interface Vlan5
 no forward interface Vlan1
 nameif DMZ
 security-level 50
 ip address 192.168.2.1 255.255.255.0 
!
ftp mode passive
clock timezone CEST 1
clock summer-time CEDT recurring last Sun Mar 2:00 last Sun Oct 3:00
object network obj_any
 subnet 0.0.0.0 0.0.0.0
object network speakersaid
 host 192.168.2.11
object-group protocol TCPUDP
 protocol-object udp
 protocol-object tcp
access-list outside_access_in extended permit object-group TCPUDP any object speakersaid eq www 
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
mtu DMZ 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-645-206.bin
no asdm history enable
arp timeout 14400
!
object network obj_any
 nat (inside,outside) dynamic interface
object network speakersaid
 nat (any,any) static 193.15.14.11
!
nat (inside,outside) after-auto source dynamic any interface
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 193.15.14.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 192.168.1.0 255.255.255.0 inside
http 192.168.10.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
telnet timeout 5
ssh timeout 5
console timeout 0

dhcpd auto_config outside
!
dhcpd dns 130.244.127.162 130.244.127.170 interface inside
!
dhcpd address 192.168.2.100-192.168.2.200 DMZ
dhcpd dns 130.244.127.162 130.244.127.170 interface DMZ
!
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ntp server 192.36.133.17 source outside
ntp server 192.36.133.25 source outside
webvpn
!
class-map inspection_default
 match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
 parameters
  message-length maximum client auto
  message-length maximum 512
policy-map global_policy
 class inspection_default
  inspect dns preset_dns_map 
  inspect ftp 
  inspect h323 h225 
  inspect h323 ras 
  inspect rsh 
  inspect rtsp 
  inspect esmtp 
  inspect sqlnet 
  inspect skinny  
  inspect sunrpc 
  inspect xdmcp 
  inspect sip  
  inspect netbios 
  inspect tftp 
  inspect ip-options 
  inspect icmp 
!
service-policy global_policy global
prompt hostname context 
no call-home reporting anonymous
Cryptochecksum:6731dc1cb267c4b84442534e23801485
: end
asdm image disk0:/asdm-645-206.bin
no asdm history enable

[Julio Carvajal]

Hello Dennis,

The problem here is that a base license on a 5505 ASA your DMZ or third vlan is restricted so it can only access another vlan.

In order for you to communicate from the DMZ to the Inside and Outside you will need the security-plus license.

Please rate helpful posts.

Regards,

Julio

[dennis.nybratt]

Hello again

I do not need to access "from" DMZ to Lan... no forward interface Vlan1

interface Vlan5

no forward interface Vlan1

nameif DMZ

I need to access Vlan5 (DMZ) from my Vlan1 (inside). do I really need a security plus license for that

My web server on Vlan5 (DMZ) can access Internet, and from Internet I can access web server in Vlan5 (DMZ) on port 80 :-)

193.15.14.11

Please explaine so a child can understand ;-)

Best regards

Dennis

[Julio Carvajal]

Hello Dennis,

As I told you before you will be restricted with the amount of VLANS on an ASA 5505.

You can have communication between vlan 1 and 2, but as soon as you add a third one, that vlan would be able to maintain communication with just one interface that  is why is called restricted.

So if you want to allow that communication you will need to order a security plus license.

Regards,

Julio

[dennis.nybratt]

OK I will try this

Im not a CLI guy so i will try to do it with ASDM 6.4

Think I need some more help where to do this in ASDM 6.4

//dennis

[anksachd]

Hi Dennis

You donot need a security plus license on ASA 5505 for accessing the resources from inside to DMZ . This can be achieved by following

object network obj-192.168.2.0

subnet 192.168.2.0 255.255.255.0

nat (inside,dmz) dynamic interface

Regards

Ankur

[dennis.nybratt]

Hello Ankur

Can you help me where to type the lines in ADSM 6.4

//Dennis

[anksachd]

Hi Dennis ,

Please go through below configuration example , which will tell you Step by step configuration of configuring NAT Rules in 8.3 via ASDM

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080b1ee95.shtml

Let me know if it helps

Ankur

[dennis.nybratt]

Hello :-)

My new Cisco ASA 5505 (for testing purpes) arrived to day,  I will start testing tomorrow

I learn somthing new every day, thanks everybody for that :-)

//Dennis

[eddie.harmoush]

Have you tried changing the no forward interface to vlan 2?

[dennis.nybratt]

what do I achive with that config???

[acomiskey]

edit: Corrected by Ankur.

[anksachd · Accepted solution]

Hi ,

Well i donot agree with the same . If you have the current config with the base license , then the DMZ Interface can only speak to outside interface and not to VLAN1 (i.e DMZ can either communicate with the outside or inside but not both )

However if the inside interface want to communicate to VLAN 5 (DMZ ) resources i.e if  inside hosts initiates a new connection to DMZ , it can certainly do so and there is no restriction for it.

interface Vlan5
 no forward interface Vlan1----> This says i dont want to communicate to inside i/f
 nameif DMZ
 security-level 50
 ip address 192.168.2.1 255.255.255.0 

Regards
Ankur

[acomiskey]

Thanks for correcting me Ankur.