Hi Guys,
Can you help me out, how to configure SNMP Community with Read Only priviledge
with my Cisco Catalyst 3560-x Series.
Regards,
Manuel
here is a reference for SNMP, it's not that complicated. And looking into SNMPv3 could be also a good idea:
http://www.cisco.com/en/US/docs/switches/lan/catalyst3750x_3560x/software/release/12.2_58_se/configuration/guide/swsnmp.html#wp1019932
And please move your post to "LAN Switching" as it has nothing to do with firewalling.
Sent from Cisco Technical Support iPad App