Solved: Configuring the User Role on FMC

thaungtunzaw · ‎09-14-2017

Hello,

I would like to check that we would like to configure user role on FMC as the User1 assigned to manage Sensor A and this User1 only allow to view and manage SensorA.

There are not available to configure in Firepower System User Management in the link https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config-guide-v62/firepower_system_user_management.html#ID-2176-00000155

Could you please suggest for it. Thanks for your help.

Regards,

Thaung

Marvin Rhoads · ‎09-15-2017

You would have to first create multiple domains and then assign each sensor to a separate domain.

Then when you create the users you assign them to the domains where the sensors you want them to manage are also assigned.

https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config-guide-v62/domain_management.html

View solution in original post

Marvin Rhoads · ‎09-15-2017

You would have to first create multiple domains and then assign each sensor to a separate domain.

Then when you create the users you assign them to the domains where the sensors you want them to manage are also assigned.

https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config-guide-v62/domain_management.html