HA firewalls restarted alone, but the Standby box crashinfo generated it on the date of the event, but the active box crash is dated 2016, would you like to know the reason for this?
Another thing I noticed was that crashinfo's Appliance Software Version is different, even firewalls using the same version of IOS
Is there a tool for me to analyze crashinfo?
Crashinfo analysis
Active# show tech-support
Cisco Adaptive Security Appliance Software Version 9.5(1)
Device Manager Version 7.6(1)
Compiled on Wed 12-Aug-15 12:22 PDT by builders
System image file is "disk0:/asa951-smp-k8.bin"
Config file at boot was "startup-config"
Active up 8 days 12 hours
failover cluster up 8 days 12 hours
========================================================================================
Standby# show tech-support
Cisco Adaptive Security Appliance Software Version 9.5(1)
Device Manager Version 7.6(1)
Compiled on Wed 12-Aug-15 12:22 PDT by builders
System image file is "disk0:/asa951-smp-k8.bin"
Config file at boot was "startup-config"
Standby up 8 days 7 hours
failover cluster up 8 days 7 hours
========================================================================================
Crashinfo Active
isco Adaptive Security Appliance Software Version 9.4(1)
Compiled on Sat 21-Mar-15 11:43 PDT by builders
Hardware: ASA5585-SSP-10
Crashinfo collected on 03:33:36.471 BRST Sat Apr 2 2016
========================================================================================
Crashinfo Standby
Cisco Adaptive Security Appliance Software Version 9.5(1)
Compiled on Wed 12-Aug-15 12:22 PDT by builders
Hardware: ASA5585-SSP-10
Crashinfo collected on 12:45:24.090 BRST Wed Oct 2 201
