CSC LDAP integraton

[rrednet]

Hello,

I'm setting up a CSC card and seem to have every thing in place.  The card has a good connection to both the Domian control agent and Domain control server.    However when I attempt to create a policy I get no LDAP users/groups listed.

I've been through all the troubleshooting steps and it seems that the server and agent are communicating on the windows 2008 server but the issue is that the agent is not passing the LDAP infomation onto the CSC card.

Any help will be greatly appreciated

I've attached the agent debug file.

Thanks

David

[Tariq Bader]

What is the CSC version ?

Please provide the following output from the ASA:

show module 1 detail

regards,

Tariq

[rrednet]

Thanks for the reply here you go -

Getting details from the Service Module, please wait...

ASA 5500 Series Content Security Services Module-10

Model:              ASA-SSM-CSC-10-K9

Hardware version:   1.0

Serial Number:      JAD172303DA

Firmware version:   1.0(11)5

Software version:   CSC SSM 6.3.1172.0

MAC Address Range:  4403.a70f.edae to 4403.a70f.edae

App. name:          CSC SSM

App. Status:        Up

App. Status Desc:   CSC SSM scan services are available

App. version:       6.3.1172.0

Data plane Status:  Up

Status:             Up

HTTP Service:       Up

Mail Service:       Up

FTP  Service:       Up

Activated:          Yes

Mgmt IP addr:       172.16.254.10

Mgmt web port:      8443

Peer IP addr: