05-13-2010 03:53 AM - edited 02-21-2020 03:57 AM
Hi,
On CSM Client >device> Access rules is showing the old config and not showing the active running config. Where as tools>preview configuration show me the running config.
How do I make the csm client show the running config.
Thanks.
05-13-2010 04:00 AM
If out-of-band (OoB) changes were made to the device (perhaps from the CLI or another tool) you may need to rediscover the device so CSM's data is up-to-date. Right-click the deivce in question and choose 'Discover Policies on Device...'
Thanks,
Scott
05-13-2010 04:38 AM
05-13-2010 04:44 AM
Raj;
When managing devices with CSM, it is expected that all configuration changes made to the device are made via CSM. Any changes made via PuTTY will not be reflected within CSM without first re-discovering the device's policies.
The screenshot does not indicate a specific error, only that policy objects alreadty present in CSM were re-used with this device. For the yellow triangle items, you will need to highlight each item and reference the matching description pane. But from the overall status, the discovery was completed successfully with three warnings.
Thanks,
Scott
05-13-2010 05:16 AM
Hi,
I have deleted the device and rediscovered, now on config archive it shows only the latest config, but I dont understand from were is the csm reflecting the old config.
Any related doc if u can tell.
Thanks,
Raj.
05-13-2010 08:55 AM
Every time you deploy with CSM, after the deployment CSM will do a "show run" and keep an archive of the config.
In the next deployment CSM will compare the archived file with the current config and that it how if finds the Out Of Band (OOB) changes.
In order to chose what CSM will do with OOB changes you go under Tools > CSM Administration > Deployment > OOB changes and you can chose Skip, Ignore, Cancel.
I hope it helps.
PK
05-16-2010 11:51 AM
Hi PK,
I did this but no change its warn, skip and cancel. I selected warn then also no change.
I don't understand y this box is showing me the very old config.
let me know if u need any more info.
Thanks,
Raj
05-17-2010 08:42 AM
You had said that CSM shows the latest config after the discovery. In the archive there is also the config from previous deployment as we explained.
I am not sure I understand your current issue.
PK
05-18-2010 12:43 AM
Yes PK,
In the config archive, I can only see the latest config (Only one config file), but in the device config display on CSM client I see the old config.
Can u send me the doc related to this problem.
Thanks,
Raj
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide