cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
493
Views
0
Helpful
1
Replies

CSM ip address is blocked by the FWSM

gaboughanem
Level 1
Level 1

Hello,

I have csm 3.3.1 sp3 and fwsm 4.0(4), to monitor the fwsm i am using the device manager from the csm.

The problem is that when asdm opens from csm it works for few seconds and csm losses connection to the fwsm.

I checked the logs on the fwsm and i found that it denied the ip of csm on the inside interface of the fwsm with port 443.

Off course i have enabled http server and allowed the ip of the csm to access the fwsm "http 10.139.2.253 255.255.255.255 inside"

i tried to open the asdm from my own workstation and it worked fine without any problem.

i also have ASA 8.2.1 which i monitor by csm without any problems.

Any idea how to fix this issue? Why the FWSM is blocking the ip of CSM where it should not?

Thank you and Regards,

1 Reply 1

gaboughanem
Level 1
Level 1

Hello,

Has any body faced this problem before?

When opening asdm for FWSM by the CSM client causes problem, where the asdm loose the connection after a while

But when i open asdm directly and not bt csm client, it works fine.

Regards,

Review Cisco Networking for a $25 gift card