05-16-2006 12:59 PM - edited 02-21-2020 12:54 AM
We have a VPN 3005 Concentrator, ver. 4.7.1. The date and time in the Filterable Event Log is one hour ahead (Monitoring, Filterable Event Log). However, the date and time in the Live Event Log is correct. The date and time is setup correctly under Configuration, System, General, Time and Date. This matches with date and time in the Live Event Log. Where else should I look to see why the date and time in the Filterable Event Log is incorrect?
Thanks.
Jill
05-20-2006 02:45 PM
Hi Jill,
You need to un-check the Enable DST Support from Config->System->General- Time and Date.
During DST (Daylight-Saving time), clocks are set one hour ahead of standard time.
Please rate if it does!
Abd Alqader
05-22-2006 07:31 AM
Abd,
If I uncheck the Enable DST Support (Config, System, General), will the clocks automatically get adjusted when the Daylight Saving Time occurs? For example, when the Daylight Saving Time occurs in October, the VPN Concentrator would fall back one hour. Thanks.
05-24-2006 01:16 AM
Really, i don't know.
But according to your question for the 60 minutes difference, unchecking this feature will adjust it to your time.
Sorry for not answering your question
Abd Alqader
05-24-2006 04:53 PM
Thanks Abd.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide