cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
425
Views
0
Helpful
1
Replies

device snmp polling

anand kumar
Level 1
Level 1

Hi All

Can you please help me out , how i m getting the logs of below,
for which snmp alerts ( snmp polling server 10.21.252.143) are generated from 172.29.131.26
where in 172.29.131.26 is the ASA firewall ip& 172.29.131.3 is CIsco Switch ip

Nov 30 2011 08:13:53: %ASA-4-313005: No matching connection for ICMP error message: icmp src

inside:172.29.131.3 dst identity:172.29.131.26 (type 5, code 1) on inside interface.  Original IP payload: icmp src

172.29.131.26 dst 10.21.252.143 (type 0, code 0).

thanks

1 Reply 1

Kureli Sankar
Cisco Employee
Cisco Employee

Anand,

icmp type 5 message is a redirect message. Is there another path between the source and the destination?  I believe

172.29.131.3 - is a another L-3 deivce that is letting 172.29.131.26 this IP know of a different path between it

172.29.131.26 and 10.21.252.143.

-Kureli

Review Cisco Networking for a $25 gift card