3192
Views
1
Helpful
1
Replies
Discovery from the device is in progress.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-13-2020 05:36 AM
As you can see the photo below.
the Discovery process is stop 50% and still 127 hours when I applied FTD to the FMC.
It seems can not stop after reload both FTD and FMC.
Please help me to solve this problem.
Labels:
- Labels:
-
Community Feedback Forum
1 Reply 1
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-23-2020 02:46 AM - edited 10-23-2020 02:53 AM
Although you restarted the FMC/FTD, I would try to restart the sftunnel between the FMC and the FTD, if that should not help, I would go to TAC to fix this issue.
> expert admin@fmcv-05:~$ sudo manage_procs.pl Password: **************** Configuration Utility ************** 1 Reconfigure Correlator 2 Reconfigure and flush Correlator 3 Restart Comm. channel 4 Update routes 5 Reset all routes 6 Validate Network 0 Exit ************************************************************** Enter choice: 3 1 **************** Configuration Utility ************** 1 Reconfigure Correlator 2 Reconfigure and flush Correlator 3 Restart Comm. channel 4 Update routes 5 Reset all routes 6 Validate Network 0 Exit ************************************************************** Enter choice: 0 Thank you admin@fmcv-05:~$
