08-09-2014 07:01 AM - edited 03-11-2019 09:36 PM
Hi,
On ASA 5510 8.2.5(50)
We are contantly gettin high cpu usage for Dispatch unit process for last 10 hours. The Dispatch unit is taking approx 40% usage constantly.
We checked teh following:
1. The interfaces.
No error counts, overruns, underruns reported.
2. show perform
All connections below normal/avg. values
3.show conn and xlate
Approx 1100 and 112
4. show traffic
shows very less drop counts ( max is 3 pkts/sec) on some interfaces not all.
Traffic usage is very less . Approx 4Mbps from all interfaces cumulatively.
5. Checked inspections.
No drops in global service policy [ only global is there]
------------------------------------------------------------------
# sh cpu usage
CPU utilization for 5 seconds = 39%; 1 minute: 39%; 5 minutes: 39%
sh processes cpu-usage sorted
PC Thread 5Sec 1Min 5Min Process
081aadc4 a79aff7c 35.7% 37.5% 42.5% Dispatch Unit
0853f89e a79a0b68 0.4% 0.2% 0.2% ARP Thread
# sh conn count
1138 in use, 8777 most used
# sh xlate count
112 in use, 265 most used
# show perfmon detail
PERFMON STATS: Current Average
Xlates 0/s 0/s
Connections 23/s 32/s
TCP Conns 20/s 28/s
UDP Conns 0/s 1/s
URL Access 0/s 0/s
URL Server Req 0/s 0/s
TCP Fixup 0/s 0/s
TCP Intercept Established Conns 0/s 0/s
TCP Intercept Attempts 0/s 0/s
TCP Embryonic Conns Timeout 0/s 1/s
HTTP Fixup 0/s 0/s
FTP Fixup 0/s 0/s
AAA Authen 0/s 0/s
AAA Author 0/s 0/s
AAA Account 0/s 0/s
VALID CONNS RATE in TCP INTERCEPT: Current Average
N/A 85.00%
SETUP RATES:
Connections for 1 minute = 23/s; 5 minutes = 32/s
TCP Conns for 1 minute = 18/s; 5 minutes = 27/s
UDP Conns for 1 minute = 1/s; 5 minutes = 2/s
08-09-2014 07:44 AM
Kindly suggest ASAP.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide