Displaying AAA username in syslog

[codewize]

Firepower 1010 locally managed
Failed login attempts are logged as 'user = *****'
I need to be able to see those attempted user names like ASA would do.

How can I do that?

[Rob Ingram]

@codewize try the command "no logging hide username" to display the username in SYSLOG messages.

[codewize]

At what prompt would that be typed?
Or is this another FlexConfig entry

[Rob Ingram]

@codewize yes try FlexConfig, there is no native GUI configuration when using FDM.

[codewize]

Seems like the command is 'no login hide username'

testing now
Nope, it doesn't like anything after 'log' throws errors deploying

[Rob Ingram]

@codewize FlexConfig is used to deploy ASA commands to FTD, the ASA command "no logging hide username" is to display usernames in SYSLOG. Did you try that syntax? I do not know what command "no login hide username" is and it's not valid on ASA.

[codewize]

no logging hide username is NOT valid on the FTD 1010
FlexConfig won't even accept it
Nor is no loggin hide username.

It will take 'no log hide username' but the deploy fails with an invalid command because putting anything after log is not acceptable.

[codewize]

Anyone have any other ideas?

[codewize]

Still need help with this

[MHM Cisco World]

you mgmt the FPR by FDM ?
MHM

[codewize]

FDM yes

[codewize]

Bump

[Marvin Rhoads]

The solution you should use is the one suggested by @Rob Ingram on 28 February.

[codewize]

Except the syntax is either wrong or that particular command is not supported on the 1010
Either way, FlexConfig won't even accept that.

[MHM Cisco World]

can you share steps you done 
two days ago we face issue in IPsec and the solution was engineer missing add ""-"" between command 
so please share steps let check it 

thanks

MHM