08-25-2015 09:50 PM - edited 03-11-2019 11:29 PM
Hi All,
I have 2 ISP terminating on the ASA5585 version 9.4
Incoming NAT-Traffic
I need to have both the Email and Lync servers NATted to public IP and both accessible at the same time.
Is that possible in my setup?
Outgoing Traffic
Internet traffic default route will go to ISP 1
How do i achieve this?
Am i suppose to insert another default route to ISP 2 with administrative distance 100
Appreciate any advise
08-26-2015 01:41 PM
Hello J,
If you need to receive traffic on both ISP's that will work meanwhile you have static translation. The inactive unit will receive the traffic and pass it to server and the same flow will be used to send the traffic out to the same path.
That will work for VPN as well. The limitation on the firewall is that only supports a single default gateway but on this case the NAT will allow the traffic and make it symmetric as the same path will use all along.
Kind regards,
Jose Orozco.
02-02-2017 01:21 PM
I posted in a similar discussion, please check if that is similar to what you are looking for.
https://supportforums.cisco.com/discussion/13212126/e-mail-server-asa
Let me know if there are any questions.
-
AJ
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide