06-30-2012 09:13 AM - edited 03-11-2019 04:24 PM
Dear All,
I am getting this error on my PIX 535 with 8.0.4 code. The error is
Error : OSPF/RIP cannot be enabled on failover interface, I am getting this error while trying to
enable RIP on the firewall. The context is single mode and failover is enabled. When I am disabling
the failover the Firewall is accepting the RIP configurations. Any inputs from anyone on this
behavior.
Regards
Faiz
Solved! Go to Solution.
06-30-2012 09:10 PM
Yes, the failover interface subnet should be a unique subnet which are not part of the RIP network statement.
Just change your failover interface subnet to a unique different subnet.
06-30-2012 09:10 PM
Yes, the failover interface subnet should be a unique subnet which are not part of the RIP network statement.
Just change your failover interface subnet to a unique different subnet.
07-01-2012 12:27 AM
Thanks , really appreciated
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide