cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

363
Views
0
Helpful
1
Replies
John
Beginner

error when downloading the Firepower software

Hello Team,

We have encoutered some problem when downloading the firepower software.

see error below.

#!/bin/sh
# This script was generated using Makeself 2.1.5

SHA512="f618026ab402b52d1c8b9714db5976f29413416e0935250943d96bcb62293b220bdefe199a3dee68daee99255243b201dcc03f3ac153d3b4287259f8d51f974c"
CRCsum="910147708"
MD5="c66a288f0f74d0bb79997f70b7a615c1"
TMPROOT=${TMPDIR:=/var/tmp}
RETURN_STRING="MD5"
label="Sourcefire 3D Device S3 Upgrade / Thu Oct  2 16:38:40 UTC 2014"
script="./upgrade.sh"
scriptargs=""
targetdir="upgrade-root"
filesizes="570522744"
keep=n
1 ACCEPTED SOLUTION

Accepted Solutions
Dinesh Verma
Cisco Employee

Hi John,

Not sure what these errors are but if you still can not download the software then open up a TAC case, available engineer will publish the required software image for you.

If this is because of some privilege issue then you can try sending an email to ent-dl@cisco.com as well along with your contract info.

Hope this helps.

Regards,

Dinesh Verma

View solution in original post

1 REPLY 1
Dinesh Verma
Cisco Employee

Hi John,

Not sure what these errors are but if you still can not download the software then open up a TAC case, available engineer will publish the required software image for you.

If this is because of some privilege issue then you can try sending an email to ent-dl@cisco.com as well along with your contract info.

Hope this helps.

Regards,

Dinesh Verma

View solution in original post

Content for Community-Ad