02-03-2016 11:03 PM - edited 03-12-2019 05:53 AM
Hello Team,
We have encoutered some problem when downloading the firepower software.
see error below.
#!/bin/sh # This script was generated using Makeself 2.1.5 SHA512="f618026ab402b52d1c8b9714db5976f29413416e0935250943d96bcb62293b220bdefe199a3dee68daee99255243b201dcc03f3ac153d3b4287259f8d51f974c" CRCsum="910147708" MD5="c66a288f0f74d0bb79997f70b7a615c1" TMPROOT=${TMPDIR:=/var/tmp} RETURN_STRING="MD5" label="Sourcefire 3D Device S3 Upgrade / Thu Oct 2 16:38:40 UTC 2014" script="./upgrade.sh" scriptargs="" targetdir="upgrade-root" filesizes="570522744" keep=n
Solved! Go to Solution.
02-10-2016 04:46 AM
Hi John,
Not sure what these errors are but if you still can not download the software then open up a TAC case, available engineer will publish the required software image for you.
If this is because of some privilege issue then you can try sending an email to ent-dl@cisco.com as well along with your contract info.
Hope this helps.
Regards,
Dinesh Verma
02-10-2016 04:46 AM
Hi John,
Not sure what these errors are but if you still can not download the software then open up a TAC case, available engineer will publish the required software image for you.
If this is because of some privilege issue then you can try sending an email to ent-dl@cisco.com as well along with your contract info.
Hope this helps.
Regards,
Dinesh Verma
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide