03-27-2003 05:20 AM - edited 02-20-2020 10:38 PM
Hi!
I'm trying to establish a trust between a W2k server and a NT4 server through a VPN tunnel.
At the main site I have a VPN 3005, and at the remote site I have a PIX501.
The tunnel terminates fine and I can ping the servers from each location.
But the trust won't come up. The server on the main site (NT4) seem to establish, but not the server (W2K) on the remote. The server on the remote site runs Active Directory.
Anyone who can enlighten me?
Best Regards
Johan
Solved! Go to Solution.
03-27-2003 09:01 PM
Hi,
make sure that your Windows networking is configured fine, you try lowering down the MTU sizes on the two servers to may be 1200B, just to avoid any DF bit (fragmentation needed) packets.
otherwise, it should not be a problem.
Thx
Afaq
03-27-2003 09:01 PM
Hi,
make sure that your Windows networking is configured fine, you try lowering down the MTU sizes on the two servers to may be 1200B, just to avoid any DF bit (fragmentation needed) packets.
otherwise, it should not be a problem.
Thx
Afaq
04-08-2003 04:13 AM
Hi Afaq!
Thanks a lot for the reply.
Your suggestion did the trick.
Everything works fine now.
Thanks
Kind regards
Johan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide