03-04-2017 11:29 AM - edited 03-12-2019 02:00 AM
Hi Team,
We have 2 ASA5515-x in failover Active/Standby mode.
Recently, a failover has accured. I had this status :
Failover On
Failover unit Secondary
Failover LAN Interface: FOLINK GigabitEthernet0/2 (up)
Unit Poll frequency 1 seconds, holdtime 15 seconds
Interface Poll frequency 5 seconds, holdtime 25 seconds
Interface Policy 1
Monitored Interfaces 3 of 114 maximum
MAC Address Move Notification Interval not set
Version: Ours 9.2(2)4, Mate 9.2(2)4
Last Failover at: 13:38:20 CEST Feb 6 2017
This host: Secondary - Active
Active time: 2270284 (sec)
slot 0: ASA5515 hw/sw rev (1.0/9.2(2)4) status (Up Sys)
Interface INTERNET (x.x.x.x): Normal (Waiting)
Interface LAN (x.x.x.x): Normal (Monitored)
Interface WAN (x.x.x.x): Normal (Waiting)
slot 1: SFR5515 hw/sw rev (N/A/5.3.1.6-16) status (Up/Up)
ASA FirePOWER, 5.3.1.6-16, Up
Other host: Primary - Failed
Active time: 0 (sec)
slot 0: ASA5515 hw/sw rev (1.0/9.2(2)4) status (Up Sys)
Interface INTERNET (0.0.0.0): Normal (Waiting)
Interface LAN (x.x.x.x): Normal (Monitored)
Interface WAN (x.x.x.x): No Link (Waiting)
slot 1: SFR5515 hw/sw rev (N/A/5.3.1.6-16) status (Up/Up)
ASA FirePOWER, 5.3.1.6-16, Up
Regards
Solved! Go to Solution.
03-04-2017 06:03 PM
On the secondary firewall the WAN interface is down.
This condition is indicated in the following line:
Interface WAN (x.x.x.x): No Link (Waiting)
Fix the root cause for that and the unit should revert to "Standby" status.
03-04-2017 06:03 PM
On the secondary firewall the WAN interface is down.
This condition is indicated in the following line:
Interface WAN (x.x.x.x): No Link (Waiting)
Fix the root cause for that and the unit should revert to "Standby" status.
03-11-2017 12:54 PM
I am sorry for the delay Mr. Marvin.
Thank you so much for your advice.
03-11-2017 05:40 PM
You're welcome.
Please mark your question as answered if it has been.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide