02-04-2011 02:03 AM - edited 03-11-2019 12:44 PM
Hi,
We are going to purchase ASA-5510-SEC-BUN-K9 in order to configure failover do we need only the same model of firewall ? or is there any thing like software feature or hardware port we need to have to configure the failover.
Regards,
Faisal
02-04-2011 06:14 AM
Hi,
You should have the same hardware model. that means another ASA5510.
Please check the requirements here:
I hope this helps.
Paul G
02-04-2011 11:34 AM
Hi Faisal,
For failover to work, both devices must be the same model (ie: ASA-5510), and for the 5510 specifically, both units must also match on having (or not) the Security Plus license.
Therefore, if you are purchasing the ASA-5510-SEC-BUN-K9, (which is the 5510 with the Security Plus license), then you need two of those.
I hope this answers your question.
Sincerely,
David.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: