FDM Etherchannel

[h.dam]

Hello,

I have got a FRP 2130 FTD v6.3.0 (mode evaluation, not yet insert the token) and I am doing testings on lab.

1. Can I create Redundant interface ? (used on ASA 55xx)

2. Can I create Etherchannel? How?

I didn't find them out on FDM. Only possible thing is to create the subinterface.

Are these limited by evaluation mode? or other reason?

Thanks very much.

[Rob Ingram]

Hi @h.dam 

Etherchannel support was only added to FDM from version 6.5. FTD 6.6.1 is the latest cisco recommended version, I suggest you upgrade.

[h.dam · Accepted solution]

Thank you Rob.

I read the v6.6 document. It does appear on FDM. So I'll upgrade, let's go and see.

How about Redundant interface, is it still available on FTD?

[Marvin Rhoads]

Redundant interfaces are not currently possible when using FDM to manage your FTD device - even as of the current latest release (6.7). Reference:

https://www.cisco.com/c/en/us/td/docs/security/firepower/670/fdm/fptd-fdm-config-guide-670/fptd-fdm-interfaces.html#concept_6940083A55184D009B6406EF167C9DD4

[h.dam]

Thank you Marvin.

Yes, I got the same by reading the v6.6 document.