Firepower 1010 - Help configuring "outside" with trunk ports
I got a customer with an old Cisco ASA 5505 with various VLANs. They are now migrating to Firepower 1010. In their existing Cisco ASA their "outside" is connected to their WAN CPE with the following configuration:
Seem like they are expecting a switched interface with trunking.
Try making the port connected to the ISP (normally Ethernet 1/1) a parent interface (remove any address and name from it) and then adding a new subinterface to it with the 10.10.10.100 address and assign the VLAN ID of 100.
That should result in a trunk port tagged with VLAN 100.
What is SecureX?
Cisco SecureX is included with all Secure Endpoint (formerly AMP for Endpoints) subscriptions. SecureX is a cloud-native platform that aggregates capabilities across your security environment. It’s designed to simplify your environment, ...
Cisco ISE Secure Wired Access Prescriptive Deployment Guide
Authors: Hariprasad Holla (until June 2018), Mahesh Nagireddy (until Dec 2018)
For an offline or printed copy of this document, simply choose ⋮ Options > Printer ...
Meet the Authors Slides- SecureX and the Evolution of Security Orchestration Automation and Response
(Live event – Wednesday, 20th, 2021 at 10:00 a.m. Pacific / 1:00 p.m. Eastern / 6:00 p.m. Paris)
This event had place on Wednesday 20th, January 202...
The following guide goes over the in and out of the Cisco Endpoints Security Analytics Dashboard as an overview and faq page
For more information on the product offering, licensing, support, and how to solution (TAC) guide links and more please visit the...
Join us live on Tuesday, January 19 at 10:00 am PT (and on demand after) as we discuss the latest version of ATT&CK and the expansion of TTPs in v8.
As a security expert, you are tasked with protecting your environment. You see the value of...