Firepower 1010 missing media drive disk0 after erase secure

[JyrkiHalonen]

after erase secure -command Firepower 1010 will not boot anymore. How to install image back?

information from console while attempting boot:

media drive disk0: not present
Attempt autoboot: "boot disk0:/installables/switch"
media drive disk0: not present
boot: cannot determine first file name on device "disk0:/installables/switch"
Attempt autoboot: "boot disk0:"
media drive disk0: not present
boot: cannot determine first file name on device "disk0:"
autoboot: All boot attempts have failed, will retry three times !
autoboot: retry count: 4 is over the limit, system will stop autoboot

[marce1000 · Accepted solution]

 - FYI : https://www.cisco.com/c/en/us/td/docs/security/asa/fxos/troubleshoot/asa-fxos-troubleshoot/system_recovery.html

 M.

[JyrkiHalonen]

Thank yuo @marce1000 , got it back online again.