I set up a Cisco 2110 device with a FTD 7.2.5 ios version but it does not have the following basic interface configuration:
is this first time setup ?
are you managing FTD with FMC or FDM ?
Please can the absence on this on the interface drop traffic on a WAN port.
we do not have any visibility what WAN switch config what Device mode and IOS to confirm what is not working here ?
Most services on the WAN port are currently not accessible from the WAN.
again this statement is not clear ? before you deploy FTD - they can accessble ? what IP range ? how does your network diagram looks like for us to assits or suggest anything here.
cts manual
propagate sgt preserve-untag
policy static sgt disabled trusted
Does your rest of the environment use CTS ?
Kindly advice on what to do
1. Provide environment information
2. provide high level diagrams
3. post WAN switch information and config where the FTD connected ?
4. when you mentioned basic config - what config you configured ? - by default FW deny all the traffic until you have any ACP rules to allow and routing in place ?
I have checked the running config and everything looks fine.
what have you checked ? are you able to ping WAN IP ? from WAN to FTD are you able to ping ?
from FTD it self you able to reach out ?
