Hello all. I'm trying to configure an IPS inline pair between an ASA and Nexus switch. The ASA is currently port-channeled down to the Nexus and I want to implement the Firepower 2130 inline in between them.
Is it possible to configure and 2 ether-channels on the IPS - 1 ether-channel for inside, 1 for outside and configure a single inline set between the ether-channel interfaces. or do I need to configure individual interfaces on the IPS and set up 2 independent inline sets?
When I configure the inline set between the 2 ether-channel interfaces, it does not automatically change the ether-channel interfaces to inline mode like it should. It works when I use physical links for the inline sets.
According to page 13 of the attached document, ether-channel with inline sets on the 4150 should work, but I am unable to get ether-channel to work with inline set on the 2130.
appreciate any help.
