Firepower 2130 running ASA app Upgrade Process (Zero downtime active/standby)

[#TCN]

Hello All,

Just looking to confirm the ASA appliance upgrade (zero downtime) can be done in the same way as before when running on Firepower 2130 chassis (ASA appliance running on FTD 2130)

e.g. 

Load files to flash / Disk0  using ASDM (or copy via FTD/TFTP etc etc)

- set boot system disk0 > new code 

- failover reload standby 

- wait for HA to be standby ready 

- no failover active (to new code)

- failover reload standby 

- failback to primary chassis 

https://www.cisco.com/c/en/us/td/docs/security/asa/upgrade/asa-upgrade.pdf

or do you use the "scope install" install security version XX commands via the chassis to install the pack? 

scope auto-install
install security-pack version 9.12.3

The upgrade is minor versions e.g. 9.12.2 > 9.12.3

Thank you 

[Marvin Rhoads · Accepted solution]

Follow the first method you mentioned - working within the ASA logical devices.

No interaction with the FXOS cli is necessary.

[#TCN]

Perfect Marvin - Thank you for the response :-)