cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1805
Views
0
Helpful
0
Replies

Firepower Module NTP NOT Changing

fatalXerror
Level 5
Level 5

Hi Guys,

I experienced a weird issue in my ASA with Firepower Services in which I am trying to change the time from local to NTP.

I am just using ASDM to manage my Firepower module and based on the ASDM configuration, it is already set to the correct NTP server but when I checked the CLI when I do "show ntp" it is still in the default NTP servers which are the sourcefire public NTPs and I cannot see in the list the NTP server that I configured in my ASDM. I tried already to re-deploy the policies and restart the NTPD service but it is still the same. 

One thing I noticed strange is that the configuration is different between the "Configuration > ASA Firepower Configuration > Device Management > Device > System > Default" to the "Configuration > ASA Firepower Configuration > Local > System Policy > Default" in which it should be the same.

Anyone here encountered the same issue?

Thanks

 

 

0 Replies 0
Review Cisco Networking for a $25 gift card