firepower unable to add on firesight

[aazmi]

hi,

i have a ASA-5512x with firepower and firesight. but unable to add firepower on firesight. can ssh firepower from firesight.

any advice.

regards

Aazmi

[Karsten Iwen]

Probably you did something wrong ...

What did you exactly do (both on FP and on FS) and what are the error messages?

[aazmi]

i got the below message ;

"Could not establish a connection with sensor. Make sure the registration keys match, that the software versions are compatible, and that the network is not blocking the connection."

[aazmi]

I have firesight ;

Software Version	5.4.0 (build 763)
OS	Sourcefire Linux OS 5.4.0 (build126)

and firepower

Sourcefire Linux OS v5.4.0 (build 127)
Sourcefire ASA5512 v5.4.0 (build 764)

[Karsten Iwen]

I would first update FireSight to the newest 5.4.x pactchlevel.

Is the output of "show managers" on FP matching your setup?

[aazmi]

on firepower

 show managers
Host                      : 10.203.5.122
Registration Key          : cisco
Registration              : pending
RPC Status                :

on firesight

same on firesight

[aazmi]

i tried to update but at 19% it failed. please help in this regard.

[Karsten Iwen]

How long did you wait? And how did it fail exactly?

[aazmi]

it took around 9 to 12 min to reach 19%, retry few time and then got the message of failed.

[hdoramane]

Hi

I have the same problem when I try to add ASA5506 Firepower to FSM Virtual Appliance on version 6.0.0 (build 1005)

I tried with the version FSM 5.4.0 when I try to patch any version 5.4.1 or 5.4.1.3 it's fails in 7%

Any idea to resolve this problem? I reimage twice my ASA but no way

Thanks

regards

[Naeimy021]

Hi,

Did anyone find a solution, I'm experiencing the same issue while adding the firepower module to Firesight. 

[Marvin Rhoads]

Please tell us the details of your issue or start a new discussion.

There are several different issues mentioned in this thread already.