ā12-04-2012 01:02 PM - edited ā03-11-2019 05:32 PM
We have a Cisco Firewall 5510.
When I VPN into the network, I have to rdp to a windows desktop in order to SSH into my linux boxes.
Please show me how to ssh ditrectly from home PC.
ā12-04-2012 02:22 PM
Hi,
If you can already access some server/computer remotely through VPN connection, you should be able to configure the ASA to include those other devices too.
If you can provide your ASA configuration (removing any sensitive information from it) we can go through the needed configurations steps for you to be able to directly use the VPN Client computer to access the remote devices with SSH.
If you post the configuration here, please also provide the IP addresses (or a network/subnet) of the devices you need to access
- Jouni
ā12-11-2012 04:50 PM
Sorry I made a mistake.
It only when I ssh or rdp from home my vpn connection at work, and try to connect with servers at another location using a point to ppoint vpn that ssh and rdp doesnt work.
ā12-11-2012 11:24 PM
Hi,
Did I undestand you correctly, is the situation the following
What you would need to confirm is
There is also other factors to the this setup but I can only give some general advice without actually seeing your ASA firewall configuration. If you want you can post that for us to go through (remove any sensitive information like public IP:s, username/passwords, etc)
- Jouni
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide