firewall asa connection with L2 switch

[azhar_offline1]

i have scenario

asa firewall-1 (outside and inside ) 

switch-1 (one port connected with asa-1)

asa firewall-2 (one port connected sw-1)

switch-2 (one port connected asa-2)

 from sw-2 added 2 different domain

how i can configure

asa1, sw-1 and asa2 all are in same network

[Aditya Ganjoo]

HI,

You need to configure the ASA in transparent mode.

Here is the link for that:

http://www.cisco.com/c/en/us/support/docs/security/pix-500-series-security-appliances/97853-Transparent-firewall.html

Regards,

Aditya

Please rate helpful posts and mark correct answers.