10-06-2015 04:50 AM - edited 03-11-2019 11:42 PM
Hi,
I have nexus core with multiple vlans configured on it. Cisco asa firewall is connected with core using port-channel and trunk.
How can I make all vlans traffic routable on firewall? I will use IP address at port-channel interface? how firewall will handle vlan tags?
Solved! Go to Solution.
10-06-2015 09:23 AM
Everything is working on core just problem is connectivity between Firewall and Core.
I have two nexus core switches and two asa firewalls configured on failover.
vPC link is up between firewall and core switches I have assigned inside IP address on port-channel interface at firewall.
!
interface Port-channel2
nameif inside
security-level 100
ip address 192.168.200.1 255.255.255.0 standby 192.168.200.2
At nexus
(config)# ip route 0.0.0.0 0.0.0.0 192.168.200.1
ping 192.168.200.1
PING 192.168.200.1 (192.168.200.1): 56 data bytes
ping: sendto 192.168.200.1 64 chars, No route to host
Request 0 timed out
ping: sendto 192.168.200.1 64 chars, No route to host
10-06-2015 10:47 PM
Hi Jon,
Any update on this? Can you help me out?
10-07-2015 02:57 AM
10-07-2015 03:00 AM
Can you do a "show int desc" on the nexsus and firewall please?
Remove all public IP addresses before you post :)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide